OBID
®
Installation
ID RWA02.ABC
Page 22 of 36
FEIG ELECTRONIC GmbH
E N G L I S H
1. Safety instructions
•
The device has to be used only for the purpose designed by the manufacturer.
•
The operation manual has to be stored available at any time and has to be handed over
to each user.
•
Unauthorized changes and the use of spare parts and additional devices which have not
been sold or recommended by the manufacturer may cause fire, electric shocks or
injuries. Such measures will lead to exclusion of any liability by the manufacturer.
•
The liability-prescriptions of the manufacturer in the issue valid at the time of purchase
are valid for the device. The manufacturer is not legally responsible for incorrect,
unsuitable manual or automatical setting of parameters for a device or the incorrect
application of a device.
•
Repairs can only be executed by the manufacturer.
•
Installation-, operation- and maintenance procedures should only be carried out by
qualified personnel.
•
Before opening the device, the power supply must always be interrupted. Make sure that
the device is without voltage by measuring. CAUTION! The fading of an operation
control (LED) is no indicator for an interrupted power supply or the device being without
voltage!
•
Works at the device and its installation have to be executed according to the national
legal requirements and local prescriptions.
•
When working on devices the valid safety regulations must be observed.
