IDENTIFICATION
ID ECCO:Lite
6 Operation
Page 14 of 23
Cache=0
Cache=0 // do not save captured data when Bluetooth is not connected
Cache=1 // sa
ve captured data in the device memory when Bluetooth is not connected
Scomp=0
Scomp=0 // do not use SComP communication protocol
Scomp=1 // use SComP communication protocol
NOTE: SComP protocol must be supported by the application running on the paired device! Please
refer to the SComP protocol description.
DevName=”Eccolite”
DevNAME=ECCOLiteXXXXXX // set the friendly name for Bluetooth
iAP=0
iAP=0 // Apple MFI authentication disabled
iAP=1 // Apple MFI authentication enabled
NOTE: For Bluetooth communication over SPP profile Apple devices require iAP to be enabled.
Otherwise it will not be possible to connect the ID ECCO:Lite to an Apple device. For Bluetooth
connection to Android or Windows devices iAP must be disabled.
ProtocolID=””
Set the protocol ID configured in the APP running on the Apple device.
Service=””
Set the service name configured in the APP running on the Apple device.
[Laser]
Set the barcode options required by the application.
GlobalMaxCodeLen=99
GlobalMinCodeLen=
UPCA_Enable=0
UPCA_Verify=1
UPCA_XmitCheck=0
UPCA_SupplDgt=0
UPCA_TruncExp=0
UPCE_Enable=0
UPCE_Verify=1
UPCE_XmitCheck=0
UPCE_SupplDgt=0
UPCE_TruncExp=0
UPCE1_Enable=0
UPCE1_Verify=1
UPCE1_XmitCheck=1
UPCE1_SupplDgt=0
UPCE1_TruncExp=0
EA
N13_Enable=1
