Assemble the Stage Clips
Insert the stage clips (1) into the two
holes on the base of the microscope
(2).
FZ12 Microscope Assembly
8
Fein
Adjust the Microscope Body Position
Loosen the lock knob (1) and rotate the
microscope body and the focusing bracket
left and right. Match the center of the zoom
body with the center of the stage plate.
Secure in place with the lock knob.
Assembling the LED Light Source
Make sure the main switch is at the “O” (off)
position.
Insert one end of the optical fiber (1) into
the inner hole (2) of the power supply box
aligning the flat surface with the lock screw
(3). Secure the optical fiber in place with the
lock screw (3).
Insert the other end of the optical fiber (1)
into the hole of the base (4), then secure in
place with the lock screw.
Insert one end of the power adapter (6) into
the inner hole (5) of the power supply box.
Insert one end of the power cable (7) into
the corresponding hole of the power adapter
(6), and the other end into the power supply
socket.
2
1
1
2
5
2
4
1
7
6
3
