Repair instructions
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2012.07
21/40
1. Lubricate the end of the tool holder and the switch ring (3.5 g).
Push the switch ring and the cam ring onto the tool holder.
2. Feed the small balls (9) into the hole of the outer cam ring completely.
NOTE
The small balls must be inside the cam ring and not lodge in the hole.
3. Insert the large balls (9) into the recesses in the switch ring.
4. Push switch ring onto the cam ring.
7. Assembly
Tool:
-Grease
04012301000
