MVK 11 / 02
Alle Rechte bei FEIN, insbesondere für den Fall der Schutzrechtsanmeldung.
Jede Verfügungsbefugnis wie Kopieren und Weitergaberecht liegt bei FEIN
.
4.1.2. Adjustment ring, ABS 9, ABS 12, ABS 14
5.
6.
3.
2.
1.
4.
FEIN - Repair - Tool
1. Place the start-up disk and the pre-tension spring on the gear housing.
2. Align the adjustment ring and the two-stage pre-
tension nut (notch on „4“) and turn in (! left-
handed thread).
3. Place the adjustment on the gear housing with the pre-tension nut turned in completely.
Turn the adjustment ring open by approx. 90°.
4. Place the cover with the locking springs in the correct position in the grooves of the gear
housing.
5. Place the cover disk flush with the holes and screw down with the four screws ( 0.6-0.8 Nm).
Check the adjustment ring and drive shaft for soft running.
Tools:
•PH2 cross-
slotted
screwdriver
