ASM 14-2; 14-2 PC
C-SC_CSSM
VERSION 1.0
2015-04-08
All rights reserved by FEIN, especially in case of patent applications.
FEIN retains all rights of disposal, such as copying and circulation.
21/30
7. Assembly
Fitting the planetary gear
1. Lay the disc (1) into the gearbox so that it lies flush.
Ensure that disc does not slip out of position during assembly.
The three prongs around the edge of the disc must lie cleanly with no interference in the gear
toothing.
2. Screw on the motor flange (2).
Tighten the cylinder head screw to 1 Nm
±0.1 Nm
and secure with Loctite.
Tools:
- Loctite 270
- Allen key: WAF 2.5
2
1