CCG 18-115 BL; CCG 18-115 BLPD; CCG 18-125 BL; CCG 18-125 BLPD
7. Fitting
C-SC_CSSM
Version 1.0
2017-12-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
25
of
38
Fitting the motor
1. Insert the air guide ring (1).
2. Press in the motor (2) in the correct position.
Ensure that plate lies in air guide ring’s recess.
When fitted, it must no longer be possible for the motor to be pulled out in an axial direction by hand. If the
motor can be pulled out by hand, the gearbox housing must be replaced.
3. Position the bearing bush (3).
4. Connect the electronics to the motor using the four terminals (4) as shown in the connection diagram.
Insert the cables into the terminal as far as possible.
Tools:
- Arbor press
- 2x square support
L= 80 mm; H= 17 mm
2
4
3
1
