CCG 18-115 BL; CCG 18-115 BLPD; CCG 18-125 BL; CCG 18-125 BLPD
7. Fitting
C-SC_CSSM
Version 1.0
2017-12-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
34
of
38
Fitting the gearbox
1. Fill the gearbox housing with 21 g of grease.
2. Coat both sides of the washer(s) (1) with Loctite 573 and position the washer(s) on the gearbox housing.
Replace the washer(s) with new washer(s) after every removal.
3. Place the bearing plate (2) on the gearbox housing.
4. Screw the bearing plate down to the gearbox housing (3) using the four screws [4 Nm].
5. Grease the sealing ring (4).
6. Position the sealing ring (4).
Tools:
- Torx T20
3
4
2
1