23
en
Working instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
For each job, use only the FEIN application tool released and intended for the respec-
tive application.
Features
The
soft start
is used to reduce torque reac-
tion forces when switching on and running
up the power tool to the no-load speed.
The
restarting protection
prevents the
power tool from automatically restarting if
the power supply is interrupted during
operation. In this case, switch off the power
tool, check the power supply and then
switch the power tool on again.
The
blocking monitor
reduces the risk of
motor damage and the risk of accidents
when an application tool blocks. In this case,
the power tool switches off automatically.
Afterwards, set the switch to the off posi-
tion, remove the power tool from the
workpiece and check the application tool
for damage. Afterwards, switch the power
tool on again.
The
electronic overload protection
reduces
the risk of motor damage if the power tool
is overloaded. In this case, the power tool
switches off automatically. Afterwards, set
the switch to the off position, remove the
power tool from the workpiece and check
the application tool for damage. Afterwards,
switch the power tool on again.
The
electronic speed preselection
enables
the speed to be adapted to the respective
application and the respective application
tool.
The
kickback monitoring
reduces the risk of
unexpected kickback of the power tool. In
this case, the power tool switches off auto-
matically. Afterwards, set the switch to the
off position, remove the power tool from
the workpiece and check the application
tool for damage. Afterwards, switch the
power tool on again.
The power tool is equipped with a
brake
system
for braking down the application
tool. This reduces the risk of accidents.
Only for CG15-125BLP (**), CG15-150BLP
(**), CG15-125BLP Inox (**)
:
The
dead man's switch
is a non-lockable
switch. The dead man's switch must be con-
tinuously actuated to keep the power tool in
operation.
WARNING
Summary of Contents for CG15-125BL Inox Series
