MVK 01/06
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer
.
FRT: EVO WSB and WSG - Variants
36/118
4.4.2. Disassembling the gearbox case
1.
Fasten the forcing bolt (special tool) into the threaded bores for handles
(830). Fasten the threaded bolts (special tool) into the vice. Drive out the
bolt (500) using a split pin.
Remove the lever (480), bolts (430) and cam ring (490).
2.
Drive out the bushing (470) using a split pin.
3.
See parts:
4.
Remove the oval head screw (420) and the fastening spring (410).
5.
Drive out the needle sleeve (460) using Kukko needle bearing remover
and hammer
.
Tools:
•
Split pin driver Ø=5
•
Split pin driver Ø=7
•
Ball peen hammer
200g
•
Phillips screwdriver
PZ2
•
Needle bearing
remover Kukko: 21-
45
1.
2.
3.
4.
5.