MVK 01/06
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer
.
FRT: EVO WSB and WSG - Variants
48/118
5.6. Assembling the switching module
1.
Pull the brown cable strand (230) through the brown strand of the field magnet
unit (15) and insert it into the carbon brush slot of the field magnet unit (15).
! The cable strand must lie precisely in the prescribed channel (arrow) !
2.
Insert the spreading tool (special tool) tightly into the field magnet unit (15).
Set the switching module (60) onto the field magnet unit (15).
3.
! The seals (55+56) must be properly seated !
4.
Pull the spreading tool (special tool) out of the field magnet unit (15).
5.
Fasten bolts (70) of the switching module (60) onto the field magnet unit (15).
6.
Guide the brown cable strand (230) through the strand duct of the field
magnet unit (15).
Tools:
•
Spread-out tool
(special tool)
64131006009
•
Phillips screwdriver
PH1
1.
2.
3.
4.
5.
6.