Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer
.
FRT: FMM 250 / FMM 250 Q
5.5. Assembly: Armature - motor case
1. Insert the armature with the gear head into the motor case
2. Drive it into the bearing fitting (motor case) with light strokes using the plastic hammer
3. Tighten the gear head on the motor case with screws ( 4pcs. Torx 15)
Tools:
- Plastic hammer
- Screwdriver
Torx 15