FSC 500 QSL; FSC 1.7; FSC 1.7 Q
6. Removal
C-SC_CSSM
Version 1.0
2018-04-16
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
11
of
24
Disassembling carbon brushes and carbon bushes holders (on both sides)
IMPORTANT!
Damage to the stator
Removing or fitting the stator incorrectly can damage the stator.
When pulling out the cables, do not push the connections inwards.
1. Disconnect the cable (1).
2. Lift the spring (2) to one side.
3. Remove the carbon brush (3).
4. Unscrew the screw (4).
5. Remove the carbon brush holder (5).
Tools:
- Assembly aid
- Torx T15
1
2
3
4
5
