Grinding
34130561060
Printed in Germany
Assembly
C-SC_CSSM
Version 1.0_Template 1.0
01.12.2020
Page
54
of
84
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.1.4 Fitting the drive wheel
Steps that must be completed:
-
Fit spacer sleeves
Tools:
- Open-ended spanner, 10 mm
- Socket head wrench, 2.5 mm
1.
Position the flange (
1
).
2.
Secure the flange using the two screws and
the nuts (
2
) [6.0 Nm ±1.0 Nm].
3.
Position the drive wheel (
3
).
2
1
3
