GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL
7. Fitting
C-SC_CSSM
Version 1.0
2015-12-14
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
31
of
53
Fitting the stator
1. Slide the stator (1) into the housing in the correct position.
Use the ID number (2) to align the stator.
2. Carefully guide the cables through the openings (3).
3. To press in the stator, centre the sleeve on the motor housing.
Ensure that the sleeve lies between the studs (4).
Tools:
- Sleeve
26 mm inner diameter
40 mm outer diameter
2
1
4
3
