GSZ 11-320 PRL; GSZ 11-320 PERL; GSZ 11-90 PERL
7. Fitting
C-SC_CSSM
Version 1.0
2015-12-14
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
41
of
53
Fitting the carbon brushes [on both sides]
1. Insert the carbon brush (1) in the correct position.
PLEASE NOTE:
The machine can be damaged by brush fire if the cable is laid incorrectly.
Do not lay the cable over the pin (4) so that the cable does not get caught.
2. Connect the cable (2).
3. Place the tension spring (3) on the carbon brush.
4. Insert the cover (5) and secure it with the screw [1.5 Nm].
Tools:
- Assembly aid
- Torx T15
1
2
3
4
5