KBM 50 Auto
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2013-09-01
80/103
Version 1.0
1. Press grooved ball bearings (1) in to intermediate bearing (2).
2. Fit intermediate bearing on motor housing.
3. Use four screws (3) and sealing rings to screw intermediate bearing down on motor housing.
Replace sealing rings each time housing is assembled.
7. Assembly
Assembling motor housing
Tool:
- Torx T20
- Arbor press
- Sleeve
outer: 30mm
inner: ~15mm
- Sleeve
outer: 21mm
inner: ~10mm
2
3
3
1
1