KBM 50 Auto
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2013-09-01
86/103
Version 1.0
1. Ensure that end of yellow mark (1) is in correct position on mark (2).
2. Connect plug (3) to electronics PCB.
3. Slide ribbon cable (4) in to connection (5) and seal connection.
4. Attach second housing half (6).
5. Screw the two housing halves together (7).
6. Place electronics PCB (8) on housing.
7. Assembly
Assembling PCB of drill unit
6
8
Tool:
- Torx T20
1
5
4
3
7
2