KBM 50 Auto
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2013-09-01
92/103
Version 1.0
1. Position two sealing rings (1) on shaft.
Replace the two sealing rings each time housing is assembled.
2. Insert two pins (2) in shaft.
Insert the two pins such that the flattened end faces the interior of the shaft.
Fix pins with a drop of grease.
3. Place outer sleeve (3) on shaft.
4. Place inner sleeve (4) on shaft.
5. Insert spiral spring (5) between inner and outer sleeve.
7. Assembly
Disassembling Weldon mounting shaft (accessory)
2
1
3
4
5
Tool:
- Grease (0 40 106 0100 1)