KBM 50 Auto
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2013-09-01
94/103
Version 1.0
7. Assembly
Disassembling Weldon mounting shaft (accessory)
3
4
2
Tool:
- Circlip pliers
- Size 6 punch
1
1. Push up outer sleeve (1) and hold.
The outer sleeve must be held at the top, otherwise the circlip cannot be assembled.
2. Press disc (2) and sleeve (3) down at the same time.
3. Insert circlip (4) and press all the way down together with disc and sleeve.
4. Place nut (3) on shaft.
5. Assemble circlip (4).