WSG 8-115; 8-125; 12-125P; WSG 11-125; WSG 15-125P; WSG 15-125PS; WSG 15-150P; WSG 15-
70Inox
7. Assembly
C-SC_CSSM
Version 1.0
2014-12-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
25
of
47
Assembling gearbox housing
1. Insert spiral springs and bolt with sealing ring.
2. Assemble pushbutton (1).
3. Coat both sides of compensating disc(s) (2) with Loctite 573 and position on gearbox housing.
After disassembly, the compensating disc must always be replaced with a new one.
4. Place bearing plate (3) on gearbox housing.
5. Screw bearing plate down to gearbox housing with four screws (4).
Tighten the four screws to 2.4 Nm.
6. Insert air guide ring (5) in gearbox housing.
5
4
2
3
1
