FEIN - Repair - Tools
Alle Rechte bei FEIN, insbesondere für den Fall der Schutzrechtanmeldung.
Jede Verfügungsbefugnis wie Kopieren und Weitergabe liegt bei FEIN.
MVK
04 / 08
5.1. Armature
1. Put in the armature into the pressing on device.
2. Put on the cover plate, ball bearing and the ball bearing support plate, press on the ball bearing.
3. Put in the ball bearing in to the support plate and press it on.
4. Warm up the pinion (approx.100°C) and press it on.
5. Press on the magnet ring with the base plate as distance holder support.
Werkzeuge:
•forceps o.Ä.
•hot air gun
•support plate:
inner Ø = 7,1 mm
•support plate:
inner Ø = 8,3 mm
•mandrel press
•two part base plate