Edition 08/2020. All rights reserved. Further versions can be found at
www.feinmetall.com
TOOLS / ACCESSORIES
With the removal tool, receptacles
can be removed from a bore
without damaging it. This is also
possible with broken receptacles or
if you do not have the possibility to
knock the receptacles out from the
back.
Below you will find step-by-step instructions for handling the tool.
FZWZ-SET-001
Mounting tool for twist proof
receptacles
Important:
Always lock the tool
before mounting!
Assembly
01 - Handle (GSFZWZ)
02 - Thread insert (BZ)
03 - Guiding sleeve (HZ)
04 - Screw-nut
01
02
03
04
Available guiding sleeves (HZ) and thread inserts (BZ):
Combination:
Receptacles:
• BZ-075-01-1 & HZ-075-01-1
H121; H075; H175; H176; H310; H561; H701; H863
• BZ-100-01-1 & HZ-100-01-1
H722; H727; H732; H752; H756; H757; H772; H875; H878
• BZ-100-02-1 &HZ-100-01-1
H320; H610; H865
• BZ-100-02-1 & HZ-100-02-1
H100; H502; H708; H731; H751; H805
• BZ-118-01-1 & HZ-118-01-1
H563, HVF3
• BZ-157-01-1 & HZ-157-01-1
H762; H866; H867; H887
• BZ-157-01-1 & HZ-157-01-2
H723; H733; H737; H760; H761; H773; H774; H880; H881; H884; H885, HVF4
Further variants are updated on the homepage under
PRODUCT FINDER/ACCESSORIES-CP/FZWZ
.
Basic Kit FZWZ-SET-001
Contents:
• Handle and
screw nut
• Box for single parts
• pliers
• Each one BZ-100-01-1
and HZ-100-01-1
