LTL00700
LED Display Clamp Lamp
Thank you for choosing this LED luminaire.
Intended use:
The luminaire is used to illuminate a desk or the area in front of a
monitor. The luminaire is clamped to the monitor frame for mounting. The
power (1V DC, 1 A) is supplied via a USB socket on the monitor, computer
or an external power supply unit. A USB power supply unit is not supplied.
Safety Instructions
Use the luminaire only on suitable monitors with a frame thickness
of 7 to 45 mm. Make sure that the lamp fixture does not touch the
sensitive screen surface.
Ensure that the monitor is firmly fixed and that the clamp luminaire
does not impair stability.
Use the luminaire indoors only and do not expose it to moisture, heat,
open fire or harsh cleaning agents.
Please do not attempt to open the housing.
In case of malfunction, heat generation or unusual smell or behaviour,
please disconnect the USB cable and contact your dealer or FeinTech.
Route the USB cable so that it cannot be accidentally caught or
tripped over.
Delivery contents:
LED Display clamp light
USB cable approx. 1.5 m length
this guide
Installation & Operation
Remove the protective film and clamp the luminaire onto the top edge of
your monitor. The touch control panels of the lamp should face you. To
avoid scratches, please do not touch the screen of your monitor. Connect
the USB-C connector of the lamp to a USB port on your monitor, hub,
computer or power supply. A USB port that can supply at least 1A current
is required for full power. These connections are often found on the back
of a PC.
Then tap on
, to power on the lamp. Then align the lamp head so that it
does not dazzle and illuminates the desired area. The lamp head can be
swivelled up and down within a total range of 170°.
By tapping on
you can switch the light colour (CCT) in 5 steps. Via
☀
you can dim the light in 5 steps. If you tap the touch surface for longer, the
5 levels change continuously. The last selected settings are saved and will
be used again the next time you switch on.
Technical data
Light source 48 LEDs 0,2W
Life span L
70
B
50
25,000 hours
Correlated Colour Temperature (CCT) 3300°–5700° K
Colour Rendering Index (CRI) > 80 R
a
Light power
Φ
use
>500 lm
Illumination > 800 Lux centre brightness at 30 cm distance
Half-value angle 120°
Power requirements DC 5 V / 1 A
Power consumption P
on
maximum 5.5 W
Energy efficiency class F (A...G)
Dimensions 447 × 85 × 25 mm
1. Swivel joint on lamp head, can be swivelled 170° up and down
2. Lamp base, for clamping to monitor frames up to 45 mm depth
3. USB-C connector for power supply 5 V, 1 A
4. Touch button for dimming (switches brightness in 5 steps)
5. on/off switch button
6. Touch button for colour temperature (switches light colour in 5 steps)
Overview controls & connector
Disposal of packaging
The packaging of your device consists exclusively of recyclable materials.
Please sort them accordingly and return them to the „Dual System“. Please
contact your dealer or your municipal waste disposal facility / recycling
centre for information on current disposal methods.
Disposal of the device
Old appliances are not worthless waste. Valuable raw materials can be
recovered through environmentally friendly disposal. At the end of its life,
this product should not be disposed of with normal household waste but
should be taken to a collection point for the recycling of electrical and
electronic equipment.
The symbol on the product, the instructions for use or the packag-
ing indicates this. The materials are recyclable according to their marking.
By reusing, recycling or other forms of recycling old appliances, you are
making an important contribution to the protection of our environment.
CE declaration of conformity
This product complies with EU directives. We, Spreewald Kommunikation-
stechnik GmbH, hereby declare that this device complies with the EMC
Directive 2014/30/EU and the RoHS Directive 2011/65/EU. You can ob-
tain the formal declaration of conformity under https://feintech.eu/ce or
on request.
FeinTech is a registered trademark of
Spreewald Kommunikationstechnik GmbH
Radensdorfer Hauptstr. 45 a
15907 Lübben (Spreewald)
Germany
Contact: info@feintech.eu • +49 3546 2398855
