9
1. Power supply connection 5 V hollow plug 3.2 mm Ø
2. EDID mode switch for adapting the maximum audio format to the sound system:
2.0: analogue stereo (output possible via all outputs)
5.1: DTS/ Dolby Digital 5.1, (5.1 output only via HDMI and optical / Toslink)
7.1: DTS-HD, Dolby Digital Plus, Dolby TrueHD / Atmos, LPCM 5.1/7.1 (HD audio formats,
multichannel PCM and Dolby Digital Plus are only possible via HDMI)
3. Input for HDMI source / player
4. Output for connection of TV, monitor or video projector
5. OPT: Optical audio digital output SPDIF Toslink
6. AUX: Analogue audio output 3.5 mm jack, only active with stereo sound
7. HDMI output for connection to an HDMI input of the sound system, delivers a video signal up
to a maximum of 1080p as well as audio (4K 60Hz are scaled to 1080p 60Hz)
8. Power LED, lights up when the power supply is active
9. Signal LED, lights up when an input signal is detected
The HDMI HD Audio Extractor has no on/off switch and thus does not require a remote control.
The unit can also be powered from a USB device socket instead of from the power supply unit.
This allows the HDMI HD Audio Extractor to be started together with the TV or PC, for example. An
adapter cable DC hollow plug to USB is included.
Note:
An HDMI-ARC connection of a soundbar is an HDMI output with audio return channel. This
connector is not an input and is not suitable for connecting the HDMI HD Audio Extractor.
Connections & Controls
