VSW02102
2-Port HDMI 2.0 Audio Extractor
supports 4K@60Hz YUV 4:4:4, HDR, HDCP 2.2, ARC
Instruction manual
Dear customer,
Thank you for purchasing this high-quality product. For optimum use and safety,
please read these instructions before installation. Please keep this manual for future
reference.
Functions:
•
Forwards the sound of an Ultra-HD HDMI signal (4K) to an AV receiver or active
speaker, with lossless transmission of the HDMI signal
•
downwards-compatible to low resolutions
•
integrated HDMI-Switch for connection of 2 HDMI sources
•
manual adjustment of audio EDID via audio mode switch
•
ARC (Audio Return Channel) for output of TV sound via digital output
Audio Mode Switch
Via EDID (Extended Display Identification Data) a connected TV or AV receiver signals
its capabilities (e.g. supported sound format). The HDMI source then automatically
delivers only supported formats. The Audio Mode switch allows you to manually set the
EDID for the sound format and force stereo or 5.1 sound.
Auto:
Bypass, output depends on the best sound format supported by the con-
nected HDMI device. HD sound or 7.1 is also possible.
2.0:
The output signal is stereo at all audio connections.
5.1:
Output signal is in 5.1 audio format (only if 5.1 audio track is present.)
Displays and controls
Installation and operation
•
Connect one or two HDMI signal sources (e.g. Blu-ray player) to the HDMI inputs.
•
Connect the HDMI display (e.g. TV or projector) to the HDMI output
•
Connect the desired audio devices with an optical cable via SPDIF Toslink and/
or an analog RCA cable.
•
Connect the power supply to the 2-Port HDMI Audio Extractor and plug it into a
wall outlet. Then turn on the display, then the source.
Caution:
Make sure that the HDMI plug contacts are not dirty or damaged when
connecting or disconnecting the HDMI cables. Make connections without power and
switch on the devices only after connecting them. Please also pay attention to a good
quality of the HDMI cables, especially for 4K media. Good cables usually have a large
diameter.
Service
Service cases
: The device must be checked by qualified personnel in the following
cases:
•
Objects or liquids have penetrated the device.
•
The device has been exposed to rain.
•
The unit is not operating normally or performance has changed.
•
The unit has been dropped or the housing is damaged.
Service personnel:
Do not attempt to repair or open the unit yourself. Contact trained
specialist personnel.
Safety check:
After repairs or servicing make sure that they have been carried out
professionally and that safe operation of the device is possible.
Disposal of packaging
The packaging of your device consists exclusively of recyclable materials. Please return
them to you local recycling system in the appropriate way. For information on current
disposal methods, please contact your dealer or your local waste disposal facility /
recycling yard.
Disposal of the device
WEEE is not worthless waste. Valuable raw materials can be recovered through envi-
ronmentally compatible disposal. At the end of its life, this product must not be dispo-
sed of with normal household waste but must be disposed of at a collection point for
the recycling of electrical and electronic equipment.
The symbol on the product, manual or packaging indicates this. The ma-
terials are recyclable according to their marking. With the reuse, material
recycling or other forms of recycling of old appliances you make an import-
ant contribution to the protection of our environment.
CE Declaration of Conformity
This product complies with EU directives and may only be used in conjunction with
shielded cables. We, Spreewald Kommunikationstechnik GmbH, hereby declare that
this device complies with the Low Voltage Directive 2014/35/EU, the EMC Directive
2014/30/EU and the RoHS Directive 2011/65/EU. You can obtain the formal declara-
tion of conformity at https://feintech.eu/ce or on request.
FeinTech
® - registered trademark of Spreewald Kommunikationstechnik GmbH
Radensdorfer Hauptstr. 45 a • 15907 Lübben (Spreewald) • Germany
info@feintech.eu
www.feintech.eu - facebook.com/feintech
Specification
Operating temperature
-5° C to +40° C
Operating humidity
5 to 90 % (non condensating)
Video input
2 x HDMI socket
Supported copy protection HDCP 2.2 and 1.4
Data rate
18 Gbps (maximum)
Maximum bandwidth
600 MHz
Supported video formats
up to 3840 x 2160 @ 60Hz YUV 4:4:4 incl. 3D
Video output
1 x HDMI socket
Supported colour
deep color 24 / 30 / 36 bit
HDR (High Dynamic Range) yes
Range with standard HDMI-
cables 24AWG
at 1080p: max. 10 m on input + 8 m on output
at 4K: max. 5 m on input + 5 m on output
Audio outputs
digital: SPDIF Toslink / analog: RCA stereo
Audio return Channel (ARC) yes
Supported audio format
DTS-HD, Dolby True-HD (inkl. Atmos), Dolby Digital Plus,
Dolby Digital, LPCM 7.1, AC3, DTS, stereo
Power consumption
< 2.5 W
Size (W×D×H)
104 x 62 x 23 mm
Net weight
160 g
Delivery content:
2-Port HDMI2.0 Audio Extractor, power adaptor, manual
Note:
HD sound formats such as Dolby TrueHD, DTS-HD can only be transmitted via HDMI.
5. 1 sound like Dolby Digital or DTS can also be transmitted via SPDIF Toslink and
Coaxial output, depending on the source material.
1.
Connection for power supply 5V DC 1A (included)
2.
LED operation indicator
3.
SPDIF Toslink optical digital audio connection for 2.0 or 5.1 sound output
4.
Switch for HDMI input selection between HDMI IN 1 and HDMI IN 2
5.
Switch for ARC function, TV sound is output via SPDIF Toslink in 2.0 or 5.1
format when activated. The TV set must support the ARC function. The analog
RCA outputs are switched off when ARC is activated.
6.
LED indicators for HDMI input selection
7.
LED indicator lights up when ARC function is switched on (digital sound from TV
via HDMI cable)
8.
Audio mode switch, for setting the audio EDID (automatic, 2.0 or 5.1). When
ARC is activated, this function has no effect.
DC 5V
SPDIF OUT
ARC
Auto/2.0/5.1
2
1
ARC
HDMI 1/2
PWR
HDMI IN1
HDMI IN2
HDMI OUT
L
R
OUT
ARC
HDMI IN
1.
HDMI input for signal source 1 (e.g. Blu-ray player, media player)
2.
HDMI input for signal source 2 (eg. game console, PC, set top box)
3.
HDMI output for TV, projector or AV receiver - also input for TV sound from ARC
(Audio Return Channel) if supported
4.
Stereo RCA analog audio outputs, left and right, e.g. for active speakers. If the
source delivers digital audio like 5.1 sound, the RCA outputs remain mute.
Please note:
•
Please do not cover the housing or install the device to avoid overheating.
•
Keep away from heat sources, water and moisture.
•
Do not place heavy objects on the device or the connection cables.
•
Do not open or drill holes in the housing.
•
Use only the supplied power supply adaptor or ensure identical performance
data when replacing.
•
Use only a soft, dry cloth to clean the surface of the unit. Please do not use ag-
gressive cleaning agents, gasoline or the like.
•
If the unit will not be used for a longer period of time, please unplug it from the
mains.
Connections
DC 5V
SPDIF OUT
ARC
Auto/2.0/5.1
2
1
ARC
HDMI 1/2
PWR
HDMI IN1
HDMI IN2
HDMI OUT
L
R
OUT
ARC
HDMI IN
