© FEISOL INC, USA
WWW.FEISOL.NET
Page 1 of 3
User Manual
►
FEISOL Video Head VH-40 / VH-60 User Manual
Assembly
The handle of the VH-40/VH-60 Video Head comes unassembled for shipping. After
unpacking the Video Head, unscrew and remove the Quick Release Knob, then remove the
black metal tube connecting the clamp and the screw. Two hex screws can now be
accessed underneath (see picture below).
Place the handle inside the handle base clamp (Note: the handle can be inserted in both
directions for right-handed or left-handed operation) and use the included hex key to tighten
the hex screws (and lock the handle at the desired angle). Finally, re-attach the black tube
and the Locking Knob to complete the handle assembly.
