NOTE:
Once paired, to operate a fixture separately from the remote, hold the CCT button for 3 seconds
on the fixture that you want to control independantly. This fixture will not respond to the remote and can
only be operated individually through the buttons on the fixture. Press and hold the CCT button for 3
seconds on the fixture again to reconnect to the remote.
5
WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Operating Instructions
Changing the Color Temperature Setting
To select the desired color temperature, cycle through 2700K - 3000K - 3500K - 4000K - 5000K
by pressing the CCT Button. This setting will be fixed each time the ON/OFF switch is turned ON.
Changing the Dimming Levels
To select the desired dimming level, Cycle through Dimming levels (High, Medium, Low, Dim, Off) by pressing the
Dim Button. This setting will be fixed each time the ON/OFF switch is turned ON.
Pair or Unpair Fixtures to the Remote
To pair a fixture to the remote, power on the fixture and hold the Dim button on the remote for 3 seconds. Lights will blink once
the units are paired. This can be done with multiple fixtures at once.
Initial Remote Recognition
The first time pairing fixtures to the remote requires that the fixtures recognize the specific remote. Power on the fixture & hold
the ON/OFF button on the remote for 3 seconds. Lights will blink once the units have recognized the remote. This can be done
with multiple fixtures at once.
To unpair a fixture from the remote, power on the fixture and hold the ON/OFF button on the remote for 3 seconds. Lights will
blink once the units are unpaired. This can be done with multiple fixtures at once. When unpaired this way, LED fixtures will be
reset to the default mode of operating individually.
CCT Button
Dim Button
ON/OFF Button
