Fyetech Electronics Technology
Page | 34
6.V-Tail (RUD NAV)
V-tail planes with independent Rudder
for navigation control.
Traditional aircraft
layout with no Aileron
1. Normal
The rudder servo must be connected to
FY-41AP aileron servo output (AIL)
V-tail without aileron 2. Elevons
V-tail servo has to connect to FY41AP
Differential Servo 1 & 2 output.
Airship
4.Normal (RUD NAV)
Due different airship configurations,
use with caution. Carry out test flights
to confirm normal function.
(15)
‘SWITCH MODE’ SW-2 FUNCTION SETTING
(i)
The Switch Mode setting allows you to select the function of each
3-Way switch position that controls the SW-2 channel.
(ii)
NOTE
: SW-2 has priority over SW-1. Only when
SW-2
is in the
„
Null
‟ Mode can
SW-1
work. Therefore „Null‟ should be one of the
options for
SW-2
, otherwise
SW-1 will not work
.
(iii)
For the other two SW-2 switch positions, you can select any of the
following Navigation functions:
SW2 Mode
Function
Remark
Null
SW-2 Deactivated
SW-2 set to NULL, Flying mode is
controlled by SW-1.
Go Home
Auto Return To Launch
On activation, plane will automatically
return to launch (RTL) point.
Line
Fixed altitude & Heading
lock flight Mode
With no controlling input from the
pilot, the plane will automatically lock
current heading & maintain altitude.
Circle
Auto Circling Mode (ACM)
Automatically fly, circling a fixed point.
