Fyetech Electronics Technology
Page | 5
FY-41AP FLIGHT MODES
With GPS data input, the following are the FY41AP selectable flight modes:
●
Deactivated Mode
- In this mode, the FY-41AP auto stabilization is turned off.
The aircraft is completely under pilot control.
●
Stabilized Mode
- level flight is automatically maintained, making flight simple,
especially for beginners. If a pilot feels the plane is out of control, simply reduce
input control and the plane will automatically recover level flight.
●
3D Mode
– if no input is given by the pilot (all sticks in the middle position), 3D
mode will lock the current aircraft attitude. Therefore the aircraft can be easily
maneuvered to complete a variety of 3D flight with added stability & smoothness.
●
Fixed altitude & Heading lock Mode
– this mode maintains aircraft flight
course & holds the altitude on activation. By using GPS data, the system
automatically corrects flight course deviation & maintains straight-line flight.
●
Auto Circling Mode
–On activation, the plane will maintain altitude and flight
speed, while initiating a counterclockwise circle. The centre of the circle is the point
of activation at a default radius of 80 meters (can be changed via FY GCS).
● Waypoint Navigation Flight Mode -
enable you to fly fully autonomous, with
up to 20 waypoint settings via the FY Ground Control Station (GCS) software.
●
Auto Return To Launch Mode (RTL)
– Upon activation of this Mode, the
aircraft will automatically return to the Home point
,
maintaining is current altitude.
Upon reaching the Home point, it will initiate auto circling.
●
GCS software
– By using a field computer and connecting the FY41AP to an FY
Data Radio via the UART port, you can set the FY41AP flight parameters, monitor
the flight progress & record / reply the flight via the FYGCS programme. For more
information, please refer to the FY Data Radio manual.
