DISCLAIMER
FY-G4 Plus 3-axis handheld gimbal for smartphone is an excellent camera
stabilizer, lightweight and portable. Prohibit any user for any illegal purpose.
Users will be responsible for all behavior of purchase and use products.
The Guilin Feiyu Electronic Technology Co. and our associates are not
responsible for any damages or liabilities caused by the use of this product.
For any unknown sources or using, we will not be any service.
Feiyu Tech reserves the right to amend this manual and the terms and
conditions of use the gimbal at any time.
Please assemble the gimbal according
to the diagram correctly .
Please upgrade firmware and configurate
parameters with the standard configuration
USB date cable.
Please charge battery with the standard
configuration charger.
Please install the camera well before power
on the Gimbal.
ATTENTION
Please visit the official website of
Feiyu Tech to get related information:
www.feiyu-tech.com
Keep the gimbal powered on, restart the remote control
and connect the receiver of RC to the gimbal, press the remote control
function button for 7 times in 5 seconds, if the indicator on the RC flashes
5 times it means the receiver and the transmitter of RC match successful-
ly, then customer can control the gimbal by the RC.
▲ RC needs to be match code whenever the following situations：
（1）Connecting properly but still control in fail.
（2）Change the receiver or wireless remote control.
Match Code
FY-G4 Plus 3-axis handheld gimbal for smartphone is an excellent camera stabilizer,
lightweight and portable. Prohibit any user for any illegal purpose. Users will be
responsible for all behavior of purchase and use products.
The Guilin Feiyu Electronic Technology Co. and our associates are not responsible
for any damages or liabilities caused by the use of this duct.
For any unknown sources or using, we will not be any service.
Feiyu Tech reserves the right to amend this manual and the terms and conditions
of use the gimbal at any time.
Please correct assemble the gimbal
according to the diagram .
Please upgrading firmware and configurate
parameters with the standard configuration
USB date cable.
Please battery charging with the standard
configuration charger.
Please install the camera well before power
on the Gimbal.
DISCLAIMER
Please visit the official website
of Feiyu Tech to get related
information:
www.feiyu-tech.com
ATTENTION
Scan and keep
an eye on FY
Wireless
remote control
Receiver
for wireless
remote control
Steps to connect wireless remote control:
Joystick
Wireless Remote Control
7
Remote Control (Optional)
USB Cable
Power
Function
Interface
Function
Interface
OFF
ON
Function
Button
Operation
Long press for 0.5 second
Long press for 3 second
after single tap
Long-distance mode switch of gimbal and manual control of angle can be realized
by remote control
Up
Left
Right
Down
Wired Remote Control
Install the receiver for wireless remote control: Insert the receiver
for wireless remote control into the function port of gimbal .
Open the wireless remote control.
Open the gimbal.
1
2
3
Use the wireless remote control to control the gimbal.
4
15 meters in an open environment.
Connect the Micro interface of wireless remote control
with 5V charger by USB cable.
Charging
Remote Control Distance
Power on / off
Please install
the receiver properly
before power on
!
Function
Button
Direction
Button
Direction Button
of The Wired Remote Control
Remote Control Operation Instructions
10
Specification
Extension Bar Diagram
Another way for extension is adjustable extension bar.
Adjustable Extension bar
Motionless Flat Surface
1. Install the smartphone properly.
2. Gimbal placed on stationary flat and keep motionless.
3. Power on the Gimbal.
4. The Gimbal is activate and it will initialize
automatically. Pick up the Gimbal to work normally.
Initialization Instructions
Gimbal needs to be initialized whenever the
following situations appear after power on
1. After power on, the angle of pitch is not level with the horizon line.
2. After power on, the angle of roll is not parallel with the horizon line.
3. When the gimbal is in heading static, the angle of heading moves frequently.
6
Initialize The Gimbal
9
Extension Bar Instructions (Optional)
With the special designed switch, the extension bar can be added directly. Allows to shoot the distance
images more easily. Special design allows for flexible extension.
8
Battery Extender Accessory (Optional)
Battery extender contents:
G4 Battery Extender Connection Picture
Charger
Rechargeable
Battery
Input: AC 100V-240V
Output: DC 4.2V
Type: 18650
Type: 18650
G4 Battery
Extender
Handheld
Accessory
Handheld
Battery
Extender
Handheld
Accessory
Power
Switch
365g（Without batteries & smartphone）
Counter weight 52g
800 mA
Adaptation
320°
Working Voltage
320°（Maybe have some
difference in different smartphone）
100°
iPhone 6 Plus/6/5s/5c/5/4s/4 and
other smartphones with similar dimensions
0.1 ~ 0.5 (Motor Overload<2G)
Usage Time
2 ~ 3 Hours
2°/S ~ 75°/S
6.0 V ~ 9 V
0.1 ~ 0.5 (Motor Overload<2G)
Motion Attitude
Tracking Accuracy
Motion Attitude
Tracking Accuracy
Overload Current
Protection
Vertical Tilting Angle
Rolls Angle
Horizontal
Panning Angle
Tilting Increments
3°/S ~ 150°/S
Panning Increments
Weight
Note:
The function button will be disabled after connecting with the remote control.
Special Working Condition （Inversion Mode） Can switch in other mode, or trip again to exit and reset
Under panning and tilting mode, single tap to switch to lock mode
Single tap to switch between panning mode and lock mode
Reset the tilting axis of the gimbal to initial orientation and initial mode
Reset (Restore to the boot-up state)
Power off
Calibration Using Remote Control
Operation
Explanation
Remark
Exit calibration and enter standby. Wake the gimbal
by pressing the function button once again
Tap Button Six Times
Match Code Mode
Match code when connecting properly but still control
in fail or change the receiver/wireless remote control
Tap Button Seven Times
Double Tap
Single Tap
Triple Tap
Quadruple Tap
Long Press For 3 Second
Wireless RC
Wireless RC
( Please pick up the gimbal quickly once it is activated. )
Panning Mode / Lock Mode
Panning and Tilting Mode
