Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn Email:feiyudz@yahoo.cn
32
Parameters setting interface includes ―PID parameters ‖,―Control parameters‖, ―Flight
parameters‖
，
―other‖.
Flight Parameter Setting:
1.
Auto photo
: Enable automatic photography function.(can set Equidistance or Timing taking
photo )
2.
Photo:
Captures a photo immediately.
3.
AP working mode Switch:
Select if Shield the operation of the remote control (the default is
operate by the remote controller, in normal you not need to switch).
4.
Loop path:
This will repeat the current waypoints path (only works in the
path navigation
mode)
5.
RC datalink Switch:
Select to use the data radio control or the RC receiver remote
control(the default is data radio control).
6.
Parachute:
Opens aircraft parachute (if applicable).
7.
RTH Activated:
Set the autopilot auto enter the Auto Return To Home mode(RTH) when it
detects communication interruption lasting 10seconds or more.
8.
RTH Deactivated:
Set the autopilot
DOES NOT
enter the Auto Return To Home mode(RTH)
even it detects communication interruption.
9.
Auto landing:
Enter the auto land procedure.
10.
Cancel auto landing:
Cancel run the auto land procedure.
