Guilin FeiYu Electronic Technology Co., Ltd
Guilin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail：service@feiyu-tech.com Page
5
6)
Parameters setting：
I.
As following Fig6,”Control”interface:
Fig6 Parameters setting --“Control” Interface
①
②
Button
Name
Function Description
RC
Means the autopilot deactivated
RPV
the auto stabilize mode
NAV
the path navigation mode
Path NAV According to set line Fly
ClickPoint Click point fly
Set ClickP
use the mouse click the target location on the
electronic map, then the airplane will fly forwards to
there
RTH
the autopilot auto return to home
Circle
self-circling mode
Cancel
Cancel mode
A Takeoff
Auto take off
A Landing Auto landing aircraft
Button
Name
Function Description
Show error
Display or hidden the line link
question
NA-Return
Set the autopilot auto enter the
Auto Return To Home mode(RTH)
when it detects communication
interruption lasting 10seconds or
more（default: NA Return）
Loop Rt
Loop fly the route you set. Only
effective in the line fly mode.
“Loop Rt” means activated, “Not
Loop” means invalid
RC
“RC” means autopilot is
controlled by transmitter, “DRRC”
means autopilot is controlled by
data radio.
NA-Photo
“NA-Photo” means disable
automatic camera, “Auto Photo”
Enable (Equidistance or Timing
photography)
Take Photo
Click this button, it can taking a
picture once.
Timing-PG
Timing-PG means timing taking
photo, “E-Dis-PG” means
Equidistance taking photo.
RC Enable
selection for closing the remote
control operation or not (default is
remote control, in generally you
don’t need to change it. ) .
Clear Track
clear flying line on the map
