Operating and installation instructions
FELA SWITCH CASAMBI | stationary 230 Volt wall switch / mobile battery switch
Status April 2020
FELA GmbH | Sturmbühlstraße 180 – 184 | 78054 Villingen-Schwenningen | HRB 600 728 Freiburg
Page 5 of 13
1.
INTRODUCTION
1.1.
Description FELA SWITCH CAMSAMBI
The present switch series is a glass light switch developed in Germany with up to four capacitive sensor
surfaces. Using energy-saving Bluetooth technology, lights and actuators can be switched and controlled
within a self-created network using the CASAMBI protocol.
The standard version of the switch is available in three colours (black, white, silver-grey) and with up to four
freely configurable buttons (capacitive sensor surfaces). The switch is operated by touching the sensor
surfaces with a finger across the entire surface. The number of keys depends on the device version; the
keys are also illuminated.
Several CASAMBI switches and lights form a mesh network based on the far-reaching Bluetooth 4.0
standard. The range of a single module is up to 20 meters.
Switches and lights can be configured and operated via the free CASAMBI App. The functions include
switching on and off, dimming the light, setting the light colour (warm white - cold white) or RGBW,
combining groups or creating and retrieving scenes.
The following versions are available:
Stationary 230 Volt (wall switch)
The glass switch is designed for stationary operation by means of a flush-mounted insert (power
supply unit) and fits into the existing installation (socket). The packaging contains both the flush-
mounted insert with the power supply unit and the glass front panel.
Mobile battery switch
The glass switch is battery operated and is embedded in a high-quality housing made of anodised
aluminium.
