34
Bandsaw
FB 540/640/740/840/940
9 Faults
9.1 Safety instructions
Warning! Risk of injury: Repairing faults incorrectly can result in personal injury or damage the machine.
For this reason this work may only be carried out by authorised, trained personnel who are familiar with
the operation of the machine and in strict observance of all safety instructions.
Warning! Danger – electric current: Work on electrical fittings may only be carried out by qualified person-
nel and in strict observance of the safety instructions.
9.2 What to do if a fault develops
Strictly speaking:
•
In the event of a breakdown which creates danger
for either personnel or equipment, the machine
should be stopped immediately by activating the
emergency stop.
•
Also disconnect the machine from the mains and
secure it from being switched on again.
•
Inform those responsible for machine faults immedia-
tely.
•
Type and extent of fault should be determined by an
authorised professional, as well as the cause and
repair.
9.3 What to do after rectifying the fault
Before switching the machine back on:
• the fault and its cause are professionally repaired,
• all safety equipment has been assembled according
to regulations and is working correctly,
• individuals are not located in the danger area of the
machine.
Warning! Risk of injury!
Faults
Summary of Contents for FB 540
