15
FS 700 K
Safety instructions
Foreign objects in the workpiece
Serious injuries
●
Carefully inspect workpieces for foreign matter (nails, screws) which might
impair processing.
During operation
Serious injuries
●
Keep the work area orderly and clean. Components and tools that are loose
or not put in their correct place may cause accidents.
●
Offcuts or other parts of the workpiece must not be removed from the
working area whilst the machine is still running.
●
Injury from flying workpieces and parts of the workpieces (e.g. knots, off-
cuts).
●
Do not lean over the working area.
●
Only remove chips when the machine is at a standstill. No program may be
loaded / executed.
Surpassing or falling below the allowed ambient temperature
Surpassing or falling below the allowed temperatures can cause malfunctions of
the machine and unpredictable machine movements, which can lead to severe
personal and material damage.
●
Only operate machine within the listed temperature range.
Dust deposits
Dust build-ups can ignite when in contact with hot parts or cause an explosive
atmosphere due to resuspension. Fire or explosion events can cause serious inju-
ries.
●
Clean production area as needed.
●
Open fire, smoking and cleaning with compressed air forbidden.
●
Only carry out spark-producing work and hot work after work release
process.
2.7.3
Maintain and troubleshoot
Improper operation of the machine
Serious injuries
●
Work on the machine may only be carried out by authorised, trained per-
sonnel who are familiar with how to operate the machine and are in strict
observance of all safety instructions.
●
If possible, only perform work when the machine is disconnected from all
energy sources and an unintentional restart is prevented.
●
The machine has to be switched off when carrying out any work on the
machine.
●
Disconnect machine from power supply before carrying out work on elec-
trical devices.
●
Do not deactivate or bypass protective devices.
Summary of Contents for FS 700 K
Page 6: ...6 Table of contents...
Page 59: ...59 FS 700 K Use 4 Switch machine on...
Page 75: ......