16
Safety instructions
Improper work at the electrical units
Deadly electric shocks
●
Work on electrical fittings may only be carried out by qualified personnel
and in strict observance of the safety instructions.
●
Disconnect machine from power supply and secure against restarting before
carrying out work at electrical devices.
Improper maintenance
Serious injuries
●
Machine may only be maintained by authorised, trained personnel who are
familiar with how to operate the machine and are in strict observance of all
safety instructions.
●
If possible, only perform maintenance work when the machine is discon-
nected from all energy sources and an unintentional restart is prevented.
●
Disconnect machine from power supply before carrying out work on elec-
trical devices.
●
Wait for all the moving parts to come to a standstill.
●
Maintenance technicians need to be fully aware of how the machine
operates and moves, and they must be familiar with the exact operating
sequence.
●
Whilst maintenance work is being carried out, secure the area around the
machine.
●
Whilst maintenance work is being carried out, put up a sign that states
"Machine under maintenance".
●
To ensure quick and unmistakable communication, visual contact with the
operators must be kept at all times.
●
Operators should repeat and confirm instructions before they are carried out.
●
Only start the machine when there is no one within the safety zone.
●
Properly reinstall all components after the maintenance work and check the
functionality.
●
As part of the machine maintenance, the whole machine, including the
safety devices, must be checked regularly for damage.
●
Keep a record of all maintenance work.
Exceeding the lifespan of protective devices that carry out a safety function
Serious injuries
The safety devices have a lifespan of 20 years. If safety devices are used
exceeding their lifespan, the proper function of the safety devices can not be
guaranteed. Deficiently maintained safety devices can cause severe injury.
●
Safety devices have to be replaced by expert personnel from Felder Group
before the end of the lifespan.
Improper replacement or reparation of safety devices with safety function
Serious injuries
●
Only let safety devices be replaced or repaired by expert personnel of the
Felder Group.
Summary of Contents for FS 700 K
Page 6: ...6 Table of contents...
Page 59: ...59 FS 700 K Use 4 Switch machine on...
Page 75: ......