38
Setup and installation
1
3
2
4
5
Fig. 20: Mount the support table brackets
1 Hexagon screw
2 Adjusting nuts 1
3 Holder bar
4 Adjusting nuts 2
5 Locking nut
Tool:
●
Combination spanner
1.
Push the hexagon screw through the holder.
2.
Turn the adjusting nut (1) on the screw.
3.
Place the holding bar on the screw.
4.
Turn the adjusting nut (2) on the screw.
5.
Fully tighten the hexagon screw and fix in place using the locking nut.
6.
Rotate the inner adjusting nuts (1 and 2) to position the support table cen-
trally.
Summary of Contents for FS 700 K
Page 6: ...6 Table of contents...
Page 59: ...59 FS 700 K Use 4 Switch machine on...
Page 75: ......