47
FS 700 K
Adjustments and tool changes
X
Y
Fig. 29: Measure distance
3.
Angle position A:
Value of X and Y is equal.
Value of X and Y is not equal.
A
Fig. 30: Adjusting angle A
1.
Loosen locking nuts.
2.
Set the position of the table extension with the adjusting
screws.
3.
Setting at X > Y:
●
Adjustment in direction "-"
Setting at X < Y:
●
Adjustment in direction "+"
4.
Tighten the lock nut.
Summary of Contents for FS 700 K
Page 6: ...6 Table of contents...
Page 59: ...59 FS 700 K Use 4 Switch machine on...
Page 75: ......
