56
Use
9.3.5
Sanding with tilted unit
The tilting sanding unit that can be swivelled from 90° - 45° makes it possible to
sand:
●
Mitred edges
●
sharp edges
●
chamfered edges
1
Fig. 39: Sanding with tilted unit
1 Workpiece fence (accessory)
NOTICE
Moving machine components
Material damage
−
Remove tools and fences from the work table before tilting.
WARNING
Running sanding belt
Through contact with the running sanding belt it could cause
serious cut or abrasion injuries.
−
Avoid contact with the running sanding belt.
−
Only use the machine in manual operation.
−
Only process workpieces in reverse operation.
−
Ensure that workpieces cannot be ejected (use a workpiece
fence).
Take note of general procedures for permitted working methods.
1.
Tilt the sanding aggregate and set the sanding angle.
2.
Set the table height correct to the workpiece.
3.
Clamp all of the clamping levers.
Summary of Contents for FS 700 K
Page 6: ...6 Table of contents...
Page 59: ...59 FS 700 K Use 4 Switch machine on...
Page 75: ......
