61
FS 700 K
Maintenance
5.
Perform a visual inspection of all machine parts.
No damage
Damage identified.
1.
Repair damage immediately.
🡆
If it is not possible, contact the Felder Group service
centre.
10.3 Clean the sanding belt
CAUTION
Running sanding belt
Cut and abrasion injuries from the sanding belt
−
Never clean the sanding belt whilst in the machine.
−
Remove the sanding belt and clean away from the machine.
Clean the sanding belt
1.
Switch the machine off and secure it against being switched on again.
2.
Remove the sanding belt.
Chapter 8.2 ‘Change / mount the sanding belt’
3.
Clean the sanding belt.
4.
Fit the sanding belt.
Summary of Contents for FS 700 K
Page 6: ...6 Table of contents...
Page 59: ...59 FS 700 K Use 4 Switch machine on...
Page 75: ......