11
FS 700 K
Safety instructions
Please note
It is prohibited to wear gloves whilst working with the machine.
It is only allowed to wear gloves whilst carrying out tool changes and
maintenance work.
2.6.2
Mandatory safety equipment
When working on or with the machine, the following must always be worn by
personnel:
Please note
Protective clothes:
Sturdy, tight-fitting clothing (tear-resistant, no wide sleeves, no rings or
other jewellery).
Protective footwear:
To protect feet from heavy falling objects and prevent from slipping
on slippery floors.
Ear protection:
To protect against loss of hearing.
Safety glasses:
Protection to prevent damage to eyes.
Respiratory mask:
To protect against dust
2.7
Residual risks
The machine has undergone a hazard analysis. The design and construction
of the machine are based on the results of this analysis and correspond to state-
of-the-art technology. The machine is considered operationally safe when used
properly. Even if the safety measures are complied with, there are still certain
associated risks that must be considered when working on the machine.
Generally applicable residual risks
●
Crushing by being caught between moving parts.
○
Do not reach into the area of moving parts.
●
Whilst processing, sparks can be created.
○
Carefully inspect workpieces for foreign matter (nails, screws) which
might impair processing.
●
Hearing damage caused by noise intensity. Hearing protection must always
be worn.
●
Risk of damage to health from dust especially when processing hard woods.
○
Connect the dust extraction system in accordance with the instructions
and make sure that it is working properly.
●
Injury from flying workpieces and parts of the workpieces.
●
Cut or crush injuries, when changing the tools.
Summary of Contents for FS 700 K
Page 6: ...6 Table of contents...
Page 59: ...59 FS 700 K Use 4 Switch machine on...
Page 75: ......
