54
Use
1
2
Fig. 37: Working positions
1 Working area for flat surfaces
2 Working area for curves
9.3.2
Authorised working methods
All other working techniques that deviate from the following uses are improper on
this machine and therefore not permitted:
●
Sanding of longitudinal sides on the longitudinal sanding side of the
machine.
●
Sanding of longitudinal sides on the longitudinal sanding side of the
machine with pivoted sanding unit.
●
Sanding of end faces using the tiltable fence mounted to the work table with
either a tilted or non-tilted sanding unit.
●
Sanding using the idle roller / support table.
●
Only process workpieces in reverse operation.
●
Use a feeding aid or a workpiece fence for small or thin workpieces.
●
Place the workpiece against the fence first and then guide it to the sanding
belt.
●
With large, heavy or longer workpieces use auxiliary equipment such as a
lifting table or table extensions.
9.3.3
Prohibited working methods
Following working techniques must never be carried out on this machine:
●
Sanding of metal components such as planer knives.
●
Removing a standard cover.
●
Simultaneous feed or overlapping of several workpieces.
Summary of Contents for FS 700 K
Page 6: ...6 Table of contents...
Page 59: ...59 FS 700 K Use 4 Switch machine on...
Page 75: ......
