IV.
Cleaning Process
：
Switch off the power.
Loosen the front cap securing knob.
Remove the black front cap.
Push up the helical rod lock and hold it while turning the
rotating disc anticlockwise, with the given wrench, until
hearing a “click. Then, turn the rotating disc anticlockwise
to remove it.
Loosen the hopper support
securing knobs. Remove the
hopper support. Disassemble
and clean them with a
toothbrush. The usage of
detergent is not necessary.
Do not disassemble the auger. Clean it with a wet
towel or bring a toothbrush and clean water to brush
it. Do not bring the machine under water to avoid
water penetrating the motor.
Assemble them in reverse order. If there is any friction sound when the grinding disc
is rotating, the hopper support may not be installed well.
Summary of Contents for NBM-100
Page 1: ......
