5
DECLARATION OF CONFORMITY
Business name of the manufacturer:
INTERSKOL POWER TOOLS S.L.
Full address of the manufacturer
Stra. de St. Joan de les Abadesses, s/n
17500 RIPOLL (Girona) SPAIN
Name and address of the person
(established in the Community) compiled
the technical file:
Jordi Carbonell, Santiago López
Stra. de St. Joan de les Abadesses, s/n
17500 RIPOLL (Girona) SPAIN
Product name:
Circular saw
Commercial name:
Circular saw
Model:
SCF184/1400
Type: Electric power tools
Serial Number: see label of the tool
Fulfils all the reevant provisions of
Directives 2006//95/EC, 2006/42/EC,
2004/108/EC, 2002/96/EC, 2002/95/EC,
2009/251/EC
We hereby declare, under our sole
responsibility, that the
FELISATTI
brand products described in this manual
SCF184/1400
comply with the following
standars of standard documents:
EN60745-1, EN60745-2-5, EN55014-1,
EN55014-2, EN61000-3-2, EN61000-3-3.
We reserve the right to make technical changes 12/2012
Santiago López
Jordi Carbonell
12
clamping devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Other safety information
Be sure the power supply is same as the voltage given
on the rating plate. The tool is fitted with a two-core cable
and plug.
Remove the power plug from socket before carrying
out any adjustment or servicing.
Additional safety warnings
WARNING!
Remove the plug from socket before
carrying out any installation, adjustment, servicing or
maintenance.
- Do not use the tool when tired or under influence of
drug, alcohol or medicine.
- Never put fingers on the switch button while moving
the tool to avoid unintentional starting of the tool.
- Ensure the mounting screws and other assemblies
are fixed properly and securely before operate the tool.
Turn on the switch and let the tool work for 30 second in a
safe position. Stop immediately if considerable vibration or
other defects are detected, have it repaired.
Residual risks
Even when the power tool is used as prescribed
it is not possible to eliminate all residual risk
factors. The following hazards may arise in connection with
the power tool’s construction and design:
- Damage to lungs if an effective dust mask is not worn.
- Damage to hearing if effective hearing protection is
not worn.
- Damages to health resulting from vibration emission if
the power tool is being used over longer period of time or
not adequately managed and properly maintained.
WARNING!
This power tool produces an
electromagnetic field during operation. This field may under
some circumstances interfere with active or passive medical
implants. To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their
physician and the medical implant manufacturer before
operating this machine.
