Felix Storch CF07L, Instruction Manual

4 

Write the Serial Number here:

______________________ 

INSTALLATION INSTRUCTIONS 

Before Using Your Freezer 

•

Remove the exterior and interior packing. 

•

Check to be sure you have all of the following parts: 



1 Storage Basket 



1 Instruction Manual 



1 Plastic Scraper 

•

Before connecting the freezer to the power source, let it stand upright for approximately 2 hours. 
This will reduce the possibility of a malfunction in the cooling system from handling during 
transportation. 

•

Clean the interior surface with lukewarm water using a soft cloth. 

Installing Your Freezer 

•

This

appliance is designed to be free standing only, and should not be recessed or built-in.

•

Place your freezer on a floor that is strong enough to support the freezer when it is fully loaded.   

•

Allow 15 cm of space between the back and sides of the freezer, which allows the proper air 

circulation. 

•

Locate the freezer away from direct sunlight and sources of heat (stove, heater, radiator, etc.). 

Direct  sunlight may affect the acrylic coating and heat sources may increase electrical 

consumption. Extremely  cold ambient temperatures may also cause the freezer to perform 

improperly. 

•

Avoid locating the freezer in moist areas.   

•

Plug the freezer into an exclusive, properly installed  and grounded wall outlet. Do not under any 

circumstances cut or remove the third (ground) prong from the power cord. Any questions 

concerning power and/or grounding should be directed toward a certified electrician or an 

authorized service center. 

•

After plugging the appliance into a wall outlet, allow the unit to cool down for 2~3 hours before 

placing food in the freezer compartment. 

Felix Storch, Inc. 
Summit Appliance Division 
770 Garrison Avenue 
Bronx, NY 10474 
www.summitappliance.com