F-960 Instruction Manual rev. 6/23/2017
1554 NE 3
rd
Ave, Camas, WA 98607, USA
20
Phone: (360) 833-8835
sales@felixinstruments.com
www.felixinstruments.com
ap
pear: “Delete File?”
Press the Left arrow for No, leaving the
file intact. Press the Right arrow for Yes, deleting the file.
File > Review
File Review displays a list of files on the SD card and allows you
to view the data contained in the files. Use the Up/Down arrows
to scroll between files and the right arrow to enter the selected
file. When reviewing trigger mode files, the software can
support viewing up to 10 records at a time. The
data.csv
file is
the F-960 default file used to store data when no other file is
selected.
After selecting a file name, the measurement mode with time of
the measurement and gas concentration will appear for Trigger
mode readings. Use the Up and Down arrows to highlight a
measurement and the Right arrow to enter the measurement
and see more detailed data, including Date, Time, O
2
and CO
2
concentrations, Mode, and Sample Volume.
Transferring Files
Open the saved data files on the SD card using Microsoft Excel
or Notepad. Data files are saved as .csv file extensions (comma
separated values). The following figure is an example data
spreadsheet. Data values included are the date and time of the
measurement, the measurement mode, the CO
2
concentration
Delete
Data . csv
16_04_04_0 . csv
