background image

11 

 

Setting the Temperature Control: 

 

You can set the temperature by touching the

 

UP and DOWN

 

symbols. When you 

push either of the two buttons for the first time, the LED readout will show the 
original temperature set previously. (The temperature preset at the factory is 38°F, 
or 3°C.) 

 

The temperature you are setting will increase by one degree each time you touch 
the UP symbol, and will decrease by one degree each time you touch the DOWN 
symbol. 

 

The range of the temperature control is from 36°F to 43°F (2°C to 6°C). 

 

To view the set temperature at any time, touch the UP or DOWN symbol. The set 
temperature will flash in the display window for 5 seconds. After 5 seconds, the 
temperature inside the unit will reappear in the display window. 

Sabbath Mode: 

Sabbath mode is available for the observance of certain religious holidays. This mode 
turns off the displays, interior light and audible alarms and prevents them from turning 
on again. Normal cooling operations will still take place. 

To initiate Sabbath mode, press the POWER and LIGHT keys at the same time for at 
least 5 seconds. The indicator light will flash four times and confirm the Sabbath mode 
is ON. 

Sabbath mode can be exited by repeating the above process. The Sabbath Mode will 
automatically exit after 96 hours. 

Temperature Memory Function: 

In the event of a power interruption

 (power surge, breaker switch, etc.)

, the unit can 

remember the previous temperature settings. When power is recovered, the cabinet 
will return to the same set temperature as before the power went off.

 

Temperature Alarm / Door Alarm: 

 

An audible alarm sounds if the storage temperature is not cold enough. The 
temperature display flashes at the same time. 

 

The cause of the temperature being too high may be: 

Warm items were placed inside 

Too much warm ambient air flowed in when rearranging and removing contents 

Power failure for some time 

The appliance is faulty. 

 

The audible alarm is automatically silenced and the temperature display stops 
flashing when the temperature is sufficiently cold again. 

 

If the door has been left open for more than 60 seconds, the alarm will sound. 
Pressing the POWER key once can switch off the audible alarm. 

 

 

 

 

Summary of Contents for FF6 PLUS Series





































Reviews: