FELIXprinters Assembly Manual for the FELIX One
Page 22
Guide fan wires to front of bracket.
(3x) small cable tie
bundle cables, but do not tighten
too much.
Tools:
2 x
1 x
102
101
103
(2x) print head assembly
Bend wires a little bit so they come to the front, while
heads are still parallel to each other.
(2x) M4 x 12
Connect extruder assembly by
placing two bolts.
(2x) normal cable tie
(1x) Long cable sleeve
Mount left motor wire and print head
wires together with cable bundle from
right side.
1. Remove nuts (placed in step 98)
2. (1x) small cable tie
Mount front assembly. Bundle print
head wires, motor wire and sensor
wire. Place cable tie loosely.
Tools:
Tools:
Tools:
2,5
104
105
106
2,5
