P
age
32
support@FELIXprinters.com
www.FELIXprinters.com
User manual FELIX 3.0 3d printer
Select which object you want to print with which extruder.
Slice the objects with one of the two options:
Option 1: CuraEngine
Goto the Slicer tab and select at least the following:
Print Configuration: 1_FELIX_3_0_Dual_Head_Mode
Then press the
Slice
button. The result should look something like this:
The left is a square used for purging when switching from one extruder to the other.
Option 2: Slic3r
Choose the slic3r slicer and select some of the following:
Print settings: x_
2
_x_Quality(x micron)